Eufy
Top Control Button Failure
Robot vacuum’s top buttons (Start, Home, Spot) do not respond or require excessive force.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn button membrane, Stuck button due to dirt, Faulty button PCB, Disconnected button ribbon cable
How to Fix / Troubleshooting
Safety first: Turn OFF the robot before opening the top cover.
Step-by-step:
- Clean around buttons: Use a soft brush or compressed air to remove dust and debris from the button gaps.
- Test with app/remote: If the robot responds to app or remote commands, the issue is localized to the button assembly.
- Open top cover: Remove screws securing the top shell and carefully lift it to access the button PCB and ribbon cable.
- Inspect and reseat cable: Ensure the ribbon cable is fully inserted and locked into the connector.
- Replace button board: If individual buttons do not click or the PCB is damaged, replace the top button control board.
When to stop: If you are not comfortable disassembling the top shell, seek professional assistance.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Top Button Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements