Laresar No Water Output During Mopping

Robot vacuum does not dispense any water while in mopping mode; mop pad stays dry.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Water tank empty, Water outlet clogged, Airlock in water line, Water pump failure

Safety: Turn off the robot and remove the water tank.

Refill tank: Fill with clean water and ensure the cap is closed properly.
Clear outlet: Use a pin or toothpick to gently clear any blockage in the tank outlet holes.
Prime system: Reinstall the tank and start a mopping cycle, allowing several minutes for water to reach the pad.
Check for pump sound: Listen for a faint buzzing from the pump when mopping is active. If silent, the pump may be faulty.
If still dry: The water pump or internal tubing may need replacement.

Medium 3/5

Laresar Water Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.