Lefant
No Water Dispensing
Robot vacuum does not dispense any water while in mopping mode; mop pad stays completely dry.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Water tank empty, Flow control valve clogged with mineral deposits, Airlock in tank, Electronic water pump failure (on pump-equipped models)
How to Fix / Troubleshooting
Safety: Turn OFF the robot and remove the water tank before inspection.
- Step 1 – Fill tank correctly: Fill the tank with clean water up to the indicated level. Ensure the cap is closed securely.
- Step 2 – Clear clogs: Shake the tank gently and tap it to dislodge any mineral deposits. If the outlet is visible, use a soft brush to clean it.
- Step 3 – Prime the system: Install the tank and start mopping mode. Allow a few minutes for water to reach the pad. Some models take time to saturate the mop.
- Step 4 – Pump-equipped models: If your Lefant model uses an electronic pump, listen for pump operation. If silent, the pump or its wiring may be faulty and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Tank or Water Pump
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements