Robot vacuum leaves a trail of dust and debris behind it and suction seems weak.

Safety: Turn OFF the robot before removing the dustbin.

• Step 1 – Empty dustbin: Remove and empty the dustbin completely.
• Step 2 – Clean or replace filters: Tap out dust from the primary and HEPA filters. Replace if they are heavily soiled or older than recommended.
• Step 3 – Check seals and gaskets: Inspect the rubber gasket around the dustbin outlet and the suction inlet on the robot. Ensure they are not deformed or missing.
• Step 4 – Inspect suction path: Look for clogs in the suction channel between the brush and dustbin. Remove any blockages.
• Step 5 – Test suction: With the robot running, feel for airflow at the exhaust. If airflow is still weak, the fan motor may be failing and require replacement.