Robot vacuum cannot start cleaning and displays C08; may also stop mid‑clean with this code.

Safety first: Turn off the robot before removing the dustbin.

• Remove and reseat dustbin: Pull out the dustbin completely. Check for debris around the bin slot and the small plastic tab that actuates the bin switch. Clean as needed and reinsert firmly until it clicks.
• Inspect bin and switch: Look for a small lever or switch inside the bin cavity. Ensure it is not stuck or broken. Verify the dustbin’s plastic tab is not cracked or missing.
• Test operation: Power on the robot and see if C08 clears. Try starting a cleaning cycle.
• If error persists: The dustbin detection switch or its wiring may be faulty. Replacement of the switch assembly or main PCB may be required.