Yeedi
Speaker / Audio Output Fault
Robot vacuum's voice prompts are distorted, very quiet, or absent, but it still cleans.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Speaker cone damaged, Speaker cable loose, Volume set very low in app, Audio amplifier on main board failing
How to Fix / Troubleshooting
Safety first: Keep the robot on a flat surface while testing audio.
- 1. Check volume settings: In the Yeedi app, verify that the voice volume is set to a normal level.
- 2. Power cycle: Restart the robot to clear any temporary audio glitches.
- 3. Internal inspection (advanced): Open the robot and locate the speaker. Ensure its wires are firmly connected to the main board.
- 4. Replace speaker: If the cone is torn or audio remains distorted, replace the speaker module.
- 5. Main board check: If a new speaker does not restore sound, the audio amplifier on the main board may be defective and the board should be replaced.
Warning: Avoid pressing on the speaker cone; it is fragile and easily damaged.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Speaker Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements