Tado
Unstable Internal Power or Firmware Crash
Tado Smart Thermostat frequently reboots or restarts on its own.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose battery contacts, Low-quality batteries, Power supply fluctuations on wired models, Firmware instability, Internal hardware fault
How to Fix / Troubleshooting
Safety warning: For wired models, turn off power before inspecting wiring.
- Secure batteries: Replace batteries with high-quality alkaline cells and ensure they are firmly seated. Check contacts for corrosion.
- Check wired power: For wired thermostats, verify that the low-voltage power wires are secure and that there are no intermittent connections.
- Update firmware: Ensure the Internet Bridge is online so that firmware updates can be delivered to the thermostat.
- Monitor after reset: If reboots continue after these steps, the internal electronics may be faulty and the thermostat should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Tado Smart Thermostat Main PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements