E17
Aksa
High Fuel Level / Bund Leak Detection
Generator shuts down; controller displays E17 High Fuel Level / Bund Alarm (for sets with day tank).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty high‑level float switch, Fuel transfer pump stuck ON, Day tank overflow, Leak into bund area triggering sensor
How to Fix / Troubleshooting
Safety first: Fuel spills are fire and environmental hazards. Stop all pumps and contain any spill immediately.
- Inspect day tank and bund: Check for visible fuel overflow or leaks around the Aksa day tank and base frame bund.
- Check high‑level switch: Locate the high‑level float or probe. Inspect for sticking, damage, or fuel contamination. Clean or replace as needed.
- Verify transfer pump control: Ensure the fuel transfer pump stops when the day tank is full. Check control relays and wiring.
- Reset alarm: After correcting the cause and cleaning any spill, reset the controller alarm and test the fuel transfer sequence.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fuel Day Tank High Level Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements