All Power America
Display Module Degradation
Generator control panel display is dim, flickering, or unreadable, but the unit still runs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LCD/LED display, Loose display ribbon cable, Low control voltage, Moisture damage to panel
How to Fix / Troubleshooting
Safety first: Turn OFF the generator and disconnect the battery before opening the control panel.
- Check control voltage: Verify that the controller is receiving the correct DC voltage. Low voltage can cause dim displays.
- Inspect display connections: Open the panel and reseat the ribbon cable or connector between the display and the main board.
- Dry moisture: If condensation is present, dry the panel and improve enclosure sealing.
- Replace display: If the display remains unreadable, replace the display module or entire control panel assembly with an All Power America replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements