Centurion External Engine Oil Leak

Visible oil leak under generator, oil spots on pad or inside enclosure.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose or damaged oil filter, Loose drain plug, Crankcase gasket seepage, Valve cover gasket leak on Centurion engine

Safety first: Turn OFF generator and allow engine to cool. Do not run with low oil level.

Locate source: Wipe down oily areas and observe where fresh oil appears.
Check oil filter: Hand-tighten the oil filter an additional 1/4–1/2 turn if slightly loose.
Inspect drain plug: Verify the drain plug is snug and gasket is intact.
Top off oil: Refill to proper level and monitor for further leakage.

When to call a technician: Persistent leaks from gaskets or seals require gasket replacement and should be handled by a technician.

Medium 3/5

Engine Oil Filter

Check Price on Amazon

We may earn a commission from links on this page.