Water pooling inside generator enclosure or signs of rust and corrosion on components.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn OFF generator, disconnect battery, and ensure all power is removed before drying components.
- Dry interior: Use towels and a fan to dry standing water and damp components. Do not use open flame heaters.
- Inspect seals: Check door gaskets and lid seals for cracks or gaps. Ensure doors close and latch properly.
- Clear drains: Locate and clear any blocked drain holes in the base pan.
- Redirect sprinklers: Adjust irrigation so it does not spray directly on the generator.
When to call a technician: If corrosion has affected wiring or the control board, a technician should inspect and replace damaged parts.
Repair Difficulty
Required Part
We may earn a commission from links on this page.