Champion
Controller Power / Display Failure
Controller display is blank or unreadable, generator otherwise appears intact
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown controller fuse, failed display backlight, loose controller power connector, internal controller failure
How to Fix / Troubleshooting
Safety first: Turn off all power sources and disconnect the battery before removing the controller panel.
- Check DC fuse: Locate and test the low-voltage fuse feeding the controller. Replace if blown.
- Verify battery voltage: Confirm adequate battery voltage at the controller power terminals.
- Inspect connectors: Reseat the multi-pin connectors on the back of the controller.
- Replace controller: If power is present but the display remains blank, the controller module likely needs replacement.
Label all connectors before removal to ensure correct reinstallation.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Generator Controller
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements