DuroMax Fuel Vapor Leak / Incomplete Combustion

Strong raw fuel smell around generator during operation

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose fuel fittings, Leaking fuel injector (EFI), Rich carburetor mixture, Cracked fuel tank or sending unit seal

How to Fix / Troubleshooting

Safety first: Shut down the generator, close fuel supply, disconnect battery negative, and ventilate the area thoroughly.

  • Inspect fuel lines and fittings: Run your hand (with gloves) along hoses and fittings to feel for wet spots. Tighten loose clamps and fittings.
  • Check tank and cap: Look for cracks in the fuel tank and ensure the cap seal is intact. Replace a damaged cap or tank.
  • Observe exhaust: If black smoke is present, the engine may be running rich. Clean or replace the air filter and check choke operation.
  • EFI systems: For fuel‑injected models, a leaking injector or rail seal may be the source. This should be diagnosed and repaired by a qualified technician.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Fuel Hose Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements