Einhell Internal Engine Mechanical Damage

Loud knocking or metallic banging noise from engine while running

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Low oil operation causing bearing wear, Connecting rod or piston damage, Excessive valve clearance, Loose flywheel

How to Fix / Troubleshooting

Safety first: Immediately shut down the generator if loud knocking is heard to prevent catastrophic failure.

  • Check oil level: Verify oil is at the correct level. If very low, internal damage is likely.
  • Inspect flywheel: Remove the recoil starter housing and check that the flywheel nut is tight and the key is not sheared.
  • Listen at idle: Restart briefly at idle only. If knocking persists, shut down and do not continue to run.

Internal engine repairs (crankshaft, rod, piston) require full teardown and should be performed by an authorized Einhell service center.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Einhell Complete Replacement Engine
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements