E13 displayed and engine shuts down; controller indicates high engine oil temperature or lube oil over‑temperature.

Safety: Allow engine to cool. Do not run with suspected lubrication issues.

• Check oil level: Verify oil is at the correct level on the dipstick. Top up if low and investigate for leaks.
• Inspect oil cooler: If the JCB engine uses an external oil cooler, check for blocked fins or restricted coolant flow (for water‑cooled types).
• Load check: Review recent load conditions. Continuous operation above rated kW can raise oil temperature. Reduce load to within nameplate rating.
• Sensor and wiring: Locate the oil temperature sensor and inspect wiring to the controller. Replace the sensor if readings are clearly abnormal compared to coolant temperature.
• Persistent high temp: If oil temperature remains high with normal load and cooling, consult a technician to inspect internal lubrication passages.