JCB Alternator Bearing Wear

High‑pitched whining or grinding noise from the alternator end of the generator.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn front or rear alternator bearings, Misalignment of engine and alternator, Contamination of bearings with dirt or coolant

Safety: Keep clear of rotating shafts and belts while inspecting.

Localize noise: Use a mechanic's stethoscope or long screwdriver to listen near the alternator bearings while running.
Check alignment: Inspect the coupling and mounting bolts for signs of misalignment or movement.
Plan bearing replacement: Bearing replacement requires alternator removal and press tools; schedule downtime and use a qualified repair shop.
Prevent recurrence: Ensure cooling air paths are clean to avoid overheating bearings.

Professional Required 5/5

Alternator Bearing Kit

Check Price on Amazon

We may earn a commission from links on this page.