Kipor
Unstable Governor Response
Kipor generator frequency fluctuates noticeably when loads change
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or worn governor linkage, Incorrect governor spring tension, Faulty electronic governor module, Sticky throttle plate
How to Fix / Troubleshooting
Safety first: Keep hands and tools away from moving linkages while the engine is running.
- Step 1 – Inspect linkage: With engine off, move the governor and throttle linkages through full travel. Lubricate joints and correct any binding.
- Step 2 – Adjust governor: Follow Kipor service procedures to set governor spring tension and droop for stable frequency.
- Step 3 – Clean throttle body: Remove intake ducting and clean carbon buildup from the throttle plate area.
- Step 4 – Replace governor module: If electronic control is erratic despite mechanical integrity, replace the governor control module.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Governor Control Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements