Kipor
Ground Fault / Neutral‑Ground Bonding Issue
Kipor generator trips building breakers or GFCI devices when running
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect neutral‑ground bonding at generator or ATS, Damaged insulation on output cables, Moisture in junction boxes, Faulty load equipment
How to Fix / Troubleshooting
Safety first: Grounding and bonding must comply with local electrical codes. Only licensed electricians should modify these connections.
- Step 1 – Inspect cables: Check generator output cables and ATS wiring for damaged insulation or signs of arcing.
- Step 2 – Verify bonding: Confirm whether the Kipor generator is configured as a separately derived system or not, and ensure neutral‑ground bonds are located correctly per code.
- Step 3 – Isolate loads: Disconnect suspect loads and see if nuisance tripping stops. Repair or replace faulty equipment.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Output Cable Set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements