Kohler
Environmental / Pest Damage
Corrosion, rust, or rodent damage inside generator enclosure
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Moisture ingress due to poor sealing, Rodents nesting in enclosure, Inadequate ventilation causing condensation, Coastal salt air exposure
How to Fix / Troubleshooting
Safety first: Turn generator OFF, open main breaker, and disconnect battery negative before cleaning inside the enclosure.
- Clean interior: Remove debris, nests, and droppings using appropriate PPE. Vacuum carefully around wiring.
- Inspect wiring: Look for chewed insulation or corroded terminals. Repair or replace damaged harnesses.
- Seal entry points: Seal small openings with rodent-resistant materials while maintaining required ventilation.
- Corrosion control: Clean light corrosion from terminals and apply dielectric grease. Severe corrosion on bus bars or boards may require part replacement.
In harsh environments, consider additional protective coatings or enclosures recommended by Kohler.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Wiring Harness
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements