Scheppach No Start – Fuel or Ignition

Generator cranks normally but does not start, no error code displayed

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Stale fuel in tank, Clogged carburetor jets (petrol), Water contamination in diesel fuel, Choked air filter

How to Fix / Troubleshooting

Safety first: Turn OFF the generator and disconnect battery negative. Work in a well‑ventilated area away from flames.

  • Check fuel age and smell: If fuel is older than 3 months or smells sour, drain the tank and carburetor/injection system. Refill with fresh fuel of the correct type.
  • Inspect air filter: Remove the air filter element and check for heavy dirt or oil. Clean or replace with a Scheppach‑approved filter.
  • Carburetor cleaning (petrol): Remove the carburetor bowl, clean out varnish and debris, and blow through the main and idle jets with carb cleaner and compressed air. Reassemble with a new bowl gasket if needed.
  • Diesel water check: On diesel models, open the water drain on the fuel filter and look for water separation. Drain until clean fuel flows and replace the filter if contaminated.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Carburetor Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements