Wacker Neuson Control Panel Power / Display Failure

Controller display is blank or intermittent, generator otherwise runs

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose controller power supply connection, Failed display backlight, Internal controller fault, Blown low-voltage fuse

Safety first: Disconnect battery negative before removing the controller or panel covers.

Check fuses: Locate and test low-voltage fuses feeding the controller. Replace blown fuses with correct rating.
Inspect power wiring: Verify tight connections at the controller's +BATT and GND terminals.
Measure supply voltage: Confirm the controller receives correct DC voltage. Trace back to charger or battery if low.
Controller replacement: If supply is correct but display remains blank, the controller module may need replacement.

Medium 3/5

Generator Controller Module

Check Price on Amazon

We may earn a commission from links on this page.