Washer-dryer combo displays F32 and may not fill or may stop early.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose pressure hose, Defective pressure switch, Wiring harness issue, Control misinterpretation of level signal

Safety first: Disconnect power and water supply.

Inspect pressure hose: Ensure the hose from the tub to the pressure switch is securely attached and not leaking.
Check for kinks or holes: Replace the hose if damaged.
Test switch: Use a multimeter to verify the switch changes state at different pressure levels. Replace if faulty.
Inspect wiring: Check the harness from the switch to the control board for continuity.

Medium 3/5

Water Level Pressure Switch

Check Price on Amazon

We may earn a commission from links on this page.