Washer-dryer combo displays F38 and may not heat or may shut down.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted heater relay on control board, Heater element shorted to ground, Wiring short in heater circuit, Failed main control board

Safety first: Disconnect power before testing heater circuits.

Test heater element: Use a multimeter to check the heater element for continuity and for shorts to the metal chassis. Replace if shorted or open.
Inspect wiring: Check heater wiring for melted insulation or shorts.
Control board inspection: Examine the main control board for burnt heater relay contacts. Replace the control if damaged.

Professional Required 5/5

Heater Element

Check Price on Amazon

We may earn a commission from links on this page.