Amana Water Inlet Valve Stuck Open

Washer-dryer combo washer section overfills or continues filling with water even when off.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Debris in valve seat, Stuck solenoid plunger, Incorrect water pressure, Failed water inlet valve

Safety first: Immediately turn off the water supply and unplug the unit to stop filling.

Check for siphoning: Ensure the drain hose is installed at the correct height and not causing back-siphon.
Inspect valve: Remove the water inlet valve and inspect for debris. Replace the valve if it leaks when de-energized.
Do not reuse faulty valve: A valve that sticks open must be replaced, not repaired.

Medium 3/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.