E42
Amica
Door Unlock Fault
Door remains locked at end of cycle; E42 displayed
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective door lock solenoid, Jammed door mechanism, Faulty PCB door unlock control, Residual water level preventing unlock
How to Fix / Troubleshooting
Safety first: Unplug the appliance. Do not force the door open with tools as this can damage the lock and seal.
- Wait for cool-down: Ensure at least 2–3 minutes have passed after cycle end; some models delay unlocking.
- Check water level: If water is visible in the drum, run a drain program. The door will not unlock if the level is too high.
- Emergency release: Use the manual door release (often a pull cord near the pump filter) to open the door in an emergency.
- Replace door lock: If E42 persists and the lock does not release even with correct water level, replace the door lock assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements