Amica Intermittent Power or Control Fault

Washer-dryer stops mid-cycle and will not continue; lights may flash

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose power connection, Overheating control board, Faulty door lock losing signal, Internal wiring intermittent

Safety first: Unplug the appliance.

Check power cord and plug: Ensure the plug fits firmly in the socket and the cord is not being pulled or bent sharply.
Inspect door lock: Wiggle the door gently during operation (only if safe) to see if the machine stops; if so, replace the door lock.
Internal inspection: Remove the top cover and check for loose connectors on the PCB and wiring harness. Reseat all connectors.
If problem persists: The PCB may be overheating or failing and should be evaluated by a technician.

Medium 3/5

Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.