Dryer function takes excessively long and clothes remain damp, but no error code is shown.

Safety: Unplug the unit before cleaning internal components.

• Clean lint filter: Remove and clean the main lint filter before every drying cycle.
• Clean condenser: For condenser-type Asko combos, remove the condenser unit and rinse thoroughly under running water to remove lint and detergent residue. Let it dry and reinstall.
• Check exhaust duct: For vented models, inspect and clean the entire duct run from the machine to the outside vent. Remove lint buildup and ensure the outside flap opens freely.
• Load size and spin: Ensure laundry is spun at high speed before drying and that loads are not oversized.

If drying is still poor, the moisture sensor or dryer NTC may be faulty and should be tested.