Washer-dryer combo shows E17; often associated with very long fill times or low water pressure.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partially closed supply valves, Clogged inlet screens, Long or undersized inlet hoses, Faulty water inlet valve coil

Safety first: Turn off water and unplug the unit before disconnecting hoses.

Verify valves fully open: Ensure both hot and cold faucets feeding the Avanti combo are fully open.
Clean inlet screens: Remove hoses and rinse the inlet valve screens to remove mineral buildup.
Check hose length and kinks: Avoid excessively long or narrow hoses. Replace kinked or damaged hoses.
Test valve coils: With power disconnected, measure resistance of the inlet valve coils. Replace the valve assembly if readings are out of spec or if one coil is open.

Medium 3/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.