Avanti
Partial Drain / Restricted Pump Flow
Washer-dryer combo does not drain completely; small amount of water remains in drum after cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Partially clogged drain pump filter, Partially blocked drain hose, Siphoning due to incorrect drain hose height, Weak drain pump
How to Fix / Troubleshooting
Safety first: Unplug the unit and be prepared for water when opening the pump area.
- Clean pump filter: Access the pump and remove any lint, coins, or debris from the filter and impeller.
- Check drain hose routing: Ensure the hose is installed at the correct height per Avanti instructions and is not inserted too far into the standpipe.
- Inspect hose interior: Disconnect the hose and flush it with water to clear any partial blockages.
- Evaluate pump performance: If water flow is still weak, the pump may be worn and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements