Avanti
Drive Belt Slippage or Motor Start Failure
Washer-dryer combo drum does not turn during wash or dry, but motor can be heard humming.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken or slipped drive belt, Seized drum or bearings, Weak motor start capacitor (if used), Obstruction in drum
How to Fix / Troubleshooting
Safety first: Unplug the unit before inspection.
- Check drum movement: Try turning the drum by hand. If it is locked, inspect for foreign objects or bearing failure.
- Inspect drive belt: Remove the rear panel and verify the belt is on both pulleys and has proper tension. Replace if broken or stretched.
- Look for obstructions: Check between the inner drum and outer tub for items like socks or underwires that may jam the drum.
- Motor issues: If the belt and drum are fine but the motor only hums, the motor or its start circuitry may be failing and should be tested by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements