Washer-dryer combo leaks water from the rear or bottom during wash or drain.

Safety first: Unplug the unit and shut off water. Tilt or move the unit carefully to avoid spilling water.

• Identify leak location: Remove rear and/or lower front panels. Run a short fill and drain cycle while observing with a flashlight to see where water drips originate.
• Tighten clamps: Use a screwdriver or pliers to snug hose clamps at the pump, tub, and drain connections.
• Replace damaged hoses: If a hose is cracked or swollen, replace it with an Avanti-compatible tub-to-pump or drain hose.
• Inspect pump body: Check the pump housing for hairline cracks or leaks at the seam. Replace the pump if leaking.