H5
Beko
Dryer Heater Control Fault
Washer-dryer displays H5; drying system does not start or stops quickly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open dryer heater element, Faulty dryer relay on PCB, Loose heater wiring, Faulty dryer NTC feedback
How to Fix / Troubleshooting
Safety first: Disconnect mains and allow the unit to cool before testing the dryer heater.
- Step 1 – Test dryer heater: Access the dryer heater and measure resistance across its terminals. An open circuit indicates a failed heater that must be replaced.
- Step 2 – Check wiring and connectors: Inspect for burnt or loose connections at the heater and PCB.
- Step 3 – Test dryer NTC: Measure the dryer NTC resistance and replace if out of specification.
- Step 4 – PCB relay: If heater and NTC are good, the PCB relay controlling the dryer heater may be faulty and require professional repair.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Dryer Heating Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements