Beko
Internal Hose or Tub Leak
Washer-dryer leaks water from the rear or underneath during operation
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or cracked sump hose, Split tub-to-pump hose, Loose hose clamp at pump or tub, Cracked plastic outer tub
How to Fix / Troubleshooting
Safety first: Unplug the appliance and shut off water supply. Be prepared for water spillage when opening panels.
- Step 1 – Visual inspection: Pull the machine forward and inspect the rear and underside for signs of water trails or mineral deposits.
- Step 2 – Remove rear/bottom panel: Access the sump hose (from tub to pump) and other hoses. Check for splits, abrasions, or loose clamps.
- Step 3 – Tighten or replace hoses: Tighten any loose clamps. Replace any hose that shows cracking or soft spots with a Beko-compatible sump or drain hose.
- Step 4 – Check outer tub: Inspect the plastic outer tub for visible cracks or impact damage. A cracked tub usually requires tub replacement, which is a major repair best handled by a technician.
- Step 5 – Test for leaks: Run a short fill and drain cycle while observing (keeping clear of moving parts and live wiring). Confirm that no leaks remain.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements