Blomberg
No Power / Mains Supply Fault
Washer-dryer combo will not power on; no lights or display response
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown mains fuse in plug, Faulty power cord, Defective on/off power switch, Failed main control board power supply section
How to Fix / Troubleshooting
Safety first: Ensure your hands are dry and the area around the outlet is not wet when checking power.
- Check outlet and fuse: Test the wall socket with another appliance. For UK-style plugs, inspect and replace the plug fuse with the correct rating if blown.
- Inspect power cord: Look for cuts, burns, or crushed sections on the Blomberg power cord. Do not use the appliance if the cord is damaged; replace it.
- Check power switch: Confirm the on/off button is firmly pressed. On some models, the switch is behind the control panel; if it feels loose or does not latch, it may need replacement.
- Internal checks (technician recommended): If the outlet and cord are good, the internal power supply on the main PCB may have failed. This involves live-voltage testing and should be performed only by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements