Blomberg
Excessive Vibration / Suspension Fault
Washer-dryer produces loud banging or knocking during spin cycles
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn shock absorbers, Broken or stretched suspension springs, Shipping bolts not removed, Machine not leveled
How to Fix / Troubleshooting
Safety first: Unplug the appliance before tipping or moving it.
- Check installation: Ensure all shipping bolts at the rear have been removed. Level the machine using the adjustable feet and lock the nuts.
- Inspect shocks and springs: Remove the rear or front panel to view the suspension. Look for leaking or detached shock absorbers and broken springs. Replace worn shocks in pairs and any damaged springs.
- Load distribution: Advise users to avoid single heavy items and to mix large and small garments to improve balance.
- Test spin: After repairs, run an empty spin and then a spin with a balanced load to confirm reduced vibration.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Shock Absorber Set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements