Blomberg
Door Seal (Bellow) Leak
Water leaking from front of washer-dryer around door area
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Torn or punctured door gasket, Debris trapped between seal and glass, Loose retaining clamp, Misaligned door
How to Fix / Troubleshooting
Safety first: Unplug the appliance and turn off water supply before working on seals.
- Inspect seal: Open the door and carefully examine the entire circumference of the rubber bellow for tears, holes, or hardened areas.
- Clean seal: Remove coins, hairpins, and lint from the folds of the seal. Wipe with a mild detergent solution.
- Check clamps: Verify that the outer and inner retaining bands are properly seated and tight. Refit if loose.
- Replace seal if damaged: Remove the outer clamp, peel the seal from the front panel, then remove the inner clamp from the tub. Fit the new Blomberg-compatible seal in reverse order, ensuring the drain holes are at the bottom.
- Test for leaks: Run a short wash while observing the door area.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Seal (Bellow)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements