Brandt
Overheating or Electrical Insulation Failure
Washer-dryer combo emits a burning smell during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Drive belt slipping on pulley, Lint buildup on dryer heater, Failing motor with overheating windings, Loose electrical connection causing arcing
How to Fix / Troubleshooting
Safety first: Immediately stop the machine, unplug it, and do not use it again until the cause is identified. Risk of fire exists.
- Inspect belt and pulleys: Remove the rear panel and check for rubber dust or a glazed belt. Replace a slipping or burnt belt.
- Clean dryer heater area: Access the dryer heater and remove lint and dust from the heater housing and ducts.
- Check for burnt wiring: Inspect wiring harnesses and connectors for signs of melting or burning. Repair or replace damaged components.
- Motor inspection: If the smell comes from the motor area and the motor is very hot, it may be failing and should be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements