Brandt
Drum Bearing or Drive System Wear
Washer-dryer combo produces a high-pitched squealing or grinding noise when spinning.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn drum bearings, Failed bearing seal allowing water ingress, Worn or misaligned drive belt, Foreign object trapped between drum and tub
How to Fix / Troubleshooting
Safety first: Unplug the appliance before inspection.
- Spin drum by hand: With the machine off, rotate the drum. A rough, grinding feel or rumbling noise indicates bearing wear.
- Inspect belt and pulley: Remove the rear panel and check the belt for glazing or fraying. Ensure the drum pulley is tight. Replace the belt if worn.
- Check for foreign objects: Shine a light through the drum holes to look for bra wires or other objects rubbing on the tub. Remove if visible.
- Bearing replacement: If bearings are noisy, the rear tub half and bearing set typically need replacement. This is a complex repair best handled by an experienced technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Drum Bearing Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements