Washer-dryer combo will not fill with water; error code 3 appears shortly after cycle start.

Safety first: Turn off power and close both hot and cold water supply valves before disconnecting hoses.

Steps:

• Check water supply: Ensure both hot and cold shutoff valves feeding the Café combo are fully open. Verify household water pressure by briefly running a nearby faucet.
• Inspect inlet hoses: Pull the unit forward slightly and check that the inlet hoses are not kinked or crushed.
• Clean inlet screens: Turn off water, disconnect the hoses at the back of the washer, and inspect the small metal screens inside the water inlet valve ports. Rinse debris under running water; do not puncture the screens.
• Check for leaks or corrosion: If the valve body is cracked, corroded, or shows signs of burning at the electrical connectors, replace the inlet valve assembly.
• Reassemble and test: Reconnect hoses (hot to hot, cold to cold), turn on water, restore power, and run a quick wash to confirm filling.

When to call a technician: If the unit still does not fill and code 3 returns, the inlet valve solenoids or water level sensing circuit may be faulty and should be tested by a professional.