Washer-dryer combo overheats or shuts off during dry cycle; error code 8 is displayed.

Safety first: Disconnect power. Surfaces inside the dryer section may be hot.

Steps:

• Clean lint filter: Remove and thoroughly clean the Café combo's lint filter. Wash with warm water and mild detergent if coated with fabric softener residue; dry completely before reinstalling.
• Inspect exhaust duct: If your model is vented, pull the unit forward and check the rear exhaust connection and wall vent for lint buildup or crushed ducting. Clean or replace duct as needed.
• Check airflow: With the unit reassembled and running a dry cycle, feel for strong airflow at the exhaust outlet. Weak airflow indicates a blockage or blower issue.
• Internal inspection: With power off, access the blower housing and remove lint clumps. Ensure the blower wheel spins freely and is firmly attached to the motor shaft.

When to call a technician: If code 8 persists after cleaning and airflow restoration, the high-limit thermostat or thermistor may be faulty and should be tested and replaced by a professional.