Washer-dryer shows E19; may be associated with EEPROM or configuration error.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Corrupted EEPROM on main PCB, Incorrect configuration data, Failed memory IC, Power surge damage

How to Fix / Troubleshooting

Safety first: Unplug the appliance. Board-level memory issues are not user-serviceable.

Step-by-step checks:

Power cycle: Disconnect power for 15 minutes, then reconnect and test. Occasionally, transient memory errors clear after a reset.
Check for other symptoms: Note any unusual display behavior, missing programs, or language resets, which support an EEPROM issue.

When to call a technician: EEPROM reprogramming or main PCB replacement requires Candy service tools and should be performed by an authorized technician.

Repair Difficulty

Professional Required 5/5

Required Part

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.