Danby Low Water Level / Underfilling

Washer-dryer combo does not fill with enough water; clothes appear barely wet.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Incorrect water level sensor calibration, Partially clogged inlet screens, Low household water pressure, Faulty pressure sensor

Safety first: Unplug and turn off water supply before removing hoses.

Clean inlet screens: Disconnect inlet hoses and clean the screens in the Danby water inlet valve.
Check water pressure: Ensure adequate flow from faucets.
Adjust cycle settings: Use cycles that allow higher water levels if available.
Inspect pressure system: Check the pressure hose and sensor for kinks or blockages; replace the sensor if faulty.

Medium 3/5

Water Inlet Valve Assembly

Check Price on Amazon

We may earn a commission from links on this page.