Danby
Start Circuit / Safety Interlock Inhibition
Washer-dryer combo powers on but will not start any cycle; pressing Start does nothing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Door not fully closed or faulty door lock, Child lock function enabled, Faulty Start/Pause button, Defective user interface board
How to Fix / Troubleshooting
Safety first: Unplug the unit before removing the control panel or door lock.
- Check display icons: Look for a child lock symbol. If present, disable child lock per the user manual (usually by holding specific buttons for several seconds).
- Verify door lock: Ensure the door closes firmly. Listen for the click of the lock when Start is pressed. If no click, the door lock may be faulty.
- Test Start button: Press the Start/Pause button multiple times. If it feels stuck or unresponsive, the switch may be defective.
- Inspect UI connections: Remove the control panel and check the ribbon cable and connectors between the UI and main board. Reseat them securely.
- Replace faulty components: Replace the door lock assembly or user interface board if they fail continuity or function tests.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Start/Pause Button (Control Panel Assembly)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements