E24
Electrolux
Drain Pump Circuit Error
Washer-dryer combo displays E24 and may not drain; often associated with control board sensing an electrical fault in the drain circuit.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted drain pump, Damaged wiring harness between pump and control, Faulty main control board output stage, Moisture intrusion at connectors
How to Fix / Troubleshooting
Safety: Disconnect power before inspection.
- 1. Visual inspection: Check the drain pump and its wiring harness for signs of overheating, melted insulation, or moisture.
- 2. Dry connectors: If there is evidence of water ingress, dry connectors thoroughly and correct any leaks that may be dripping onto wiring.
- 3. Electrical testing: Use a multimeter to check continuity of the harness and resistance of the pump. Replace the pump if readings are out of spec.
If the pump and wiring are sound, the main control board may have a failed output component and will likely need replacement by a professional.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements