Electrolux Drum Bearing or Drive System Wear

Washer-dryer combo produces a high-pitched squeal or grinding noise when spinning or tumbling.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn rear tub bearings, Failing drum spider shaft, Worn or misaligned drive belt, Foreign object trapped between inner and outer tub

How to Fix / Troubleshooting

Safety: Unplug the unit. Do not continue to run the machine if grinding is severe, as it can damage the tub.

  • 1. Spin drum by hand: With the machine off, rotate the drum. Listen for grinding and feel for roughness or play.
  • 2. Check for play: Lift the front of the drum up and down. Excessive movement suggests bearing or spider failure.
  • 3. Inspect belt: Remove the rear panel and check the drive belt for cracks or glazing. Replace if worn.

Rear bearing or spider replacement on Electrolux combos usually requires splitting the tub and is a major repair. In many cases, replacing the entire tub assembly is recommended and is best done by a professional.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Rear Tub Bearing Kit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements