Washer-dryer combo shows E18; may be related to drain pump overcurrent or blockage.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Foreign object jammed in Equator drain pump, Severely clogged pump filter, Kinked or blocked drain hose, Failing drain pump motor drawing high current

How to Fix / Troubleshooting

Safety first: Unplug the unit and prepare for water spillage when opening the pump filter.

Clean pump filter: Open the lower front access panel, drain residual water, and remove the pump filter. Clear all debris and check the impeller for free movement.
Inspect drain hose: Ensure the hose is not kinked or crushed behind the unit. Remove and flush with water if necessary.
Check for repeated tripping: If the pump repeatedly stops and E18 appears even when clean, the motor may be overheating or drawing too much current and should be replaced.

Repair Difficulty

Medium 3/5

Required Part

Drain Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.