Equator Internal Hose / Pump Leak

Washer-dryer combo leaks water from the rear or bottom during wash or drain.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose or cracked tub-to-pump hose on Equator combo, Leaking drain pump housing, Split drain hose, Loose hose clamps

Safety first: Unplug the unit and turn off water supply. Tilt the unit only with assistance to avoid injury.

Inspect rear hoses: Pull the unit forward and check the external drain hose and inlet hoses for leaks while running a short fill/drain test.
Access bottom (if possible): Remove the lower front panel or tilt the unit back slightly to inspect the tub-to-pump hose and pump housing for drips during operation.
Tighten or replace: Tighten loose clamps and replace any cracked hoses or leaking pump assemblies.

Medium 3/5

Tub-to-Pump Hose

Check Price on Amazon

We may earn a commission from links on this page.