Equator Drum Bearing / Spider Arm Failure

Washer-dryer combo makes a loud grinding or rumbling noise during spin; noise increases with speed.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn rear tub bearings in Equator combo, Damaged drum spider (support arm), Failed bearing seal allowing water ingress, Off-center drum causing metal-on-metal contact

How to Fix / Troubleshooting

Safety first: Unplug the unit. Continued use with failed bearings can cause severe damage.

Check drum play: With the door open, lift the inner drum up and down. Excessive movement or clunking indicates bearing or spider issues.
Spin by hand: Rotate the drum manually. A rough, grinding feel or loud rumble confirms bearing wear.
Plan for major repair: Bearing or spider replacement requires disassembling the tub and is typically a technician-level repair. In many cases, the entire rear tub assembly is replaced.

Repair Difficulty

Professional Required 5/5

Required Part

Rear Tub Bearing Assembly

Check Price on Amazon

We may earn a commission from links on this page.