Fagor
No Power / Dead Appliance
Washer-dryer combo will not power on at all; no lights or display.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown mains fuse, Faulty mains filter (EMI filter), Defective on/off power switch, Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Ensure the appliance is unplugged before opening any panels. Mains voltage is lethal.
- Step 1 – Check outlet and fuse: Test the wall socket with another appliance. Check the plug fuse (if applicable) and replace with the correct rating if blown.
- Step 2 – Inspect mains cable: Look for cuts or damage to the Fagor power cord. Replace if compromised.
- Step 3 – Test mains filter and switch: Remove the top cover and locate the mains filter module and on/off switch. With power disconnected, test continuity through the switch when turned on. If open, replace the switch. Check the filter for burn marks; replace if damaged.
- Step 4 – Control board power supply: If mains reaches the PCB but there is no low-voltage output (requires live testing by a qualified person), the board’s power supply is likely faulty and the PCB should be repaired or replaced professionally.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control Board (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements