Fisher & Paykel Voltage Drop / Loose Connection

Washer-dryer combo display flickers or resets during spin or when the dryer heater turns on.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose mains connection at terminal block, Undersized extension cord, Loose Fisher & Paykel main board connectors, Weak household circuit

How to Fix / Troubleshooting

Safety first: Unplug the appliance before accessing the rear terminal block or control board.

Avoid extension cords: Plug the washer-dryer directly into a dedicated wall outlet.
Check terminal block: Remove the rear cover over the mains terminal block. Tighten all screw terminals securely.
Inspect board connectors: Remove the top cover and reseat the main power connectors on the Fisher & Paykel control board.
House wiring: If flickering persists, have an electrician check the circuit for voltage drops under load.

Repair Difficulty

Medium 3/5